Most homeowners favor stainless steel sinks. They are shiny and sleek and look classy. Do you know that stainless steel is known for its durability and appeal? Moreover, these sinks are not that expensive, and they are resistant to fade, crack, or chip. However, cleaning these sinks may be a challenging task to undertake, and the stains become noticeable when they are dirty.
If you are wondering how to restore the original appeal of your sink, experts have come forward to help you out. You don’t have to look beyond these points to get clean and shiny stainless steel sinks.
Table of Contents
How Often Do You Need to Clean the Sink?
When it comes to the frequency of cleaning the stainless steel sinks, believe it or not, a modern stainless steel sink with great durability does not require frequent cleaning. It is a much easier process that requires very little time than other alternatives you find in the market. You can clean it within a short duration, half an hour before your guests visit your place.
After using the sink, you must rinse it with water and, if possible, with warm water. Rinse the sink after every use as it washes away soap residue and food stains. If you want to keep the sink in good shape, you must dry it after rinsing regularly.
If you are consistent with this process, you must only deep clean the sink once every week. Don’t stick to this number because there is no hard and fast rule regarding the frequency. If your sink bowl is in good condition, you might not have to go for deep cleaning every week. Are you wondering how to thoroughly clean the sink deeply? Here is your guide.
Try Rinsing the Area
Source: amazon.com
When you create a clean surface, the cleaning procedure becomes simple. You should start the process without grains, chunks, or bits of food. Hence, rinse the sink well. You may use hot water for rinsing the sink. There are a few sinks that come with an in-sink dispenser. It assures the sink does not get clogged. You may run it a few times to confirm the smooth flow of water. However, if there are bits of food or grains, you can run hot water several times before you start using it for washing.
Coat the Sink
A magic ingredient that gives you sparkling clean stainless steel sinks is baking soda. Just fill the sink with this ingredient and leave it for some time. Moreover, you may go for a mixture of vinegar and baking soda to solve any issues of cleaning the sink.
Along with the sink, you can use this solution for cleaning the bathtub and getting rid of other stains in unclogged toilets and other such areas. For cleaning the stainless steel sink, please start the process by coating the sink with a layer of baking soda and leaving it for some time. You can gently rub the sink after some time and rinse it with lukewarm water.
The Direction of Scrubbing
Source: homedit.com
After layering the sink with baking soda, you must initiate the procedure by scrubbing the steel. There are a few important reminders here. They are listed below:
- Never use highly abrasive scrubbers because they damage the sink and result in rust. Further, never use the scratch side of the kitchen sponge because it is too abrasive. Instead, go for a soft sponge or a soft cloth.
- Wear gloves when working with baking soda. Although you may feel that it might not lead to skin irritation, it can make your skin feel uncomfortable and dry. It is always better and wiser to wear gloves while cleaning.
Spray Vinegar
As illustrated earlier, baking soda with vinegar is a magic ingredient that works well for the kitchen sink. However, if you do not have baking soda you can manage with white vinegar. The chemical has a magnificent reaction that helps in the cleaning process.
The mixture of baking soda and vinegar begins a chemical reaction that helps in the thorough cleaning of the sink. It is easiest when spraying a bottle of vinegar evenly in the kitchen sink. If you do not have a spray dispenser, you may pour the vinegar carefully and slowly all over the sink.
Rinse the Sink
Now comes the easiest part of the entire cleaning game. You have to go for a second rinse to pull up as much dirt as possible. Continue rinsing the sink unless you get it a shiny and sparkling clean area. Ensure that the baking soda and vinegar site for five to ten minutes before observing bubbles.
When that happens, you can assure that the sink is clean. However, sometimes the stains are so stubborn that they might not go away with a single cleaning session. You might then go for a second cleaning procedure.
Dry the Sink
It is the most vital and unfortunately the most ignored step by homeowners. After completing the rinsing process, use a dry cloth for drying the area. You must ensure no water in the sink to avoid water spots. You would never want the clean sink to be full of fuzz. Thus, use a paper towel for the drying process. Although you might have small pieces of paper in the sink, you can do away with that later.
Rub It
Source: thespruce.com
Now comes the last step that assures the sink looks great, and that is buffing the sink by using olive oil and cloth. It will add shine and create a layer of protection that keeps the sink cleaner for long. One important note here is that you need a meager amount of olive oil for this purpose. Never add too much because that will make the sink greasy. Now, if that happens accidentally, you may use a piece of cloth for wiping away extra olive oil.
So that is all with cleaning and maintaining the stainless steel sink. If you are cautious of the high finish of your sink and you are consistent with the cleaning process, you can maintain the original shine. Keeping the sink dry after use every day is very important if you want to carry out your regular task smoothly. Do take care of all these steps to get a shiny, easy to clean, and well-cared sink in the future.
